Genesis Atomizer – What is it in Vaping?

Definition

A Genesis Atomizer is a rebuildable tank atomiser (RTA) that combines a stainless-steel deck with a surrounding glass tank or metal reservoir sitting directly beneath the coil. Wick material—usually stainless-steel mesh or rolled cable—runs vertically through the coil and down into the tank, feeding e-liquid by capillary action. Designed for flavour purists, the Genesis style delivers saturated, warm vapour from a user-built coil while offering the convenience of 3–6 mL e-liquid storage. It sits between a traditional dripper and a modern Sub-Ohm Tank”>sub-ohm tank, giving advanced Australian vapers full control over resistance, wicking and airflow.

Technical Details

How It Works

E-liquid travels up the wick via capillary action and gravity, meeting a coil mounted horizontally across two posts. Air enters through side or bottom airflow slots, passes over the coil, and exits through a 510 DripTip“>drip tip. Because the wick is constantly fed from below, dry hits are rare once wicked correctly.

Typical Specifications

  • Tank capacity: 3–6 mL
  • Deck diameter: 20–22 mm
  • Post configuration: 2-post or 3-post with gold-plated screws for conductivity
  • Wiregauge range: 24–30 AWG Kanthal, Ni80 or SS316L
  • Resistance range: 0.3–1.2 Ω (single coil)

Variations

Modern “Genesis-style” atomisers include top-fill, juice-flow control and hybrid 510 positive pins. Older Russian and Chinese clones remain popular for Mod“>mechanical mod users chasing classic aesthetics.

Usage & Tips

  • Wicking: Roll stainless-steel mesh tightly to avoid gurgling or flooding; torch oxidise to prevent shorts.
  • Coil placement: Position the coil 1–2 mm above the deck and directly over the wick channel for best flavour.
  • Cleaning: Rinse deck and tank weekly to remove sweetener gunk; replace wick every 7–10 days.
  • Safety: Always check resistance on an Ohm Meter”>ohm meter before firing; avoid over-tightening the glass tank to prevent cracking.

History & Context

The first Genesis Atomiser appeared on E-Cigarette-Forum in 2010, created by Swedish modder “Raidy.” Its “genesis” name signalled a rebirth of flavour in early vaping. While modern RTAs have eclipsed it in convenience, the Genesis niche persists among Australian hobbyists who value craftsmanship and nuanced tobacco or dessert notes.

Share the Post: