Elevated Coil – Definition & How It Affects Vaping Performance

Definition

An Elevated Coil is a style of heating element in rebuildable atomisers where the coil is raised above the deck, creating extra space for airflow and e-liquid. Instead of sitting flush with the build deck, the coil is mounted on posts, legs, or “legs-up” clamps so vapour can travel underneath as well as around the coil. This design boosts flavour intensity and helps prevent spit-back, making it popular among Australian vapers who chase dense clouds and rich e-juice taste in both mechanical and regulated e-cigarette setups.

Technical Details

How It Works

By lifting the coil 2–6 mm off the deck, the atomiser draws air from below as well as the sides, maximising surface contact with the heating wire. The extra clearance allows e-liquid to wick evenly from the wick tails hanging down into the Juice Well”>juice well, reducing dry hits.

Common Variations

• Legs-Up: Coil legs are bent upward to create the elevation.
• Post-Mounted: Clamp posts are taller, automatically raising the coil.
• Raised Clamp Decks: Deck features built-in platforms or “coil skids”.
• Mesh Strips: Rolled mesh arches for even heat distribution.

Typical Diameter“>inner diameter ranges from 2.5 mm to 4 mm; wire gauges 24–28 AWG Kanthal, Ni80, or SS316L are common. Resistance values fall between 0.15 Ω and 0.4 Ω for sub-ohmvaping.

Usage & Tips

Getting the Best Performance

• Trim wicks so tails just touch the deck—too long causes flooding, too short causes dry hits.
• Centre the coil directly under top airflow slots for uniform cloud production.
• Pulse-fire at 20–30 W to check for hot spots before full vaping.

Common Problems & Fixes

• Spit-back: Raise coil slightly higher or increase wattage by 5–10 W.
• Muted flavour: Lower coil closer to airflow without touching the deck.

Always confirm the coil is secure and resistance is stable on a Mod“>regulated mod before use; elevated builds can stress posts if overtightened.

History & Context

The elevated coil concept emerged in 2015 when Australian hobbyists began experimenting with “legs-up” Kanthal builds in Velocity-style RDAs. As squonk-ready e-cigarette devices gained popularity, manufacturers like Vandy Vape and Wotofo released dedicated raised-deck atomisers, cementing the technique as a staple in advanced vaping culture across Australia and beyond.